How to Install the Shugg Window Draught Excluder

TRANSCRIPTION:

"Hello. I'm Maurice Beinat, Technical Director at ecoMaster. Today I want to take you through the
installation of the GCE6 draught excluder for frameless windows. Nothing could be simpler! It's really just three simple steps: Measure, Cut and Press into place! Couldn't be simpler than that. Now before
you get started you're going to need 4 tools.

Firstly you'll need a measuring tape for measuring to length; a pencil for marking the seal to length; and then a mitre box and a fine-tooth saw to cut the seal. That's it! Let's get started.

Step 1: Measure to length. Remember if your draught excluder is still intact, then just use that as a template. Okay! Now that you've got the length, let's go and cut the draught excluder to size.

Step 2 is to Cut to length. Mark the seal with your pencil. And then simply hold it firmly in the mitre box, and gently cut to length. Clean up the end of the seal a little bit; and then you're ready to fit.

So here we are with the draught excluder cut to length. So the last step, Step 3, is to simply press it in place. To start, line it up at one end and then simply press all the way on across the window, until you have it all in place.

And there you have it! Job done.?

ecoMaster,bunnings,diy home improvement,door draught excluder,door seals,draught dodgers,draught excluder,draught proofing,draught sealing,draught seals,ecofriendly home,energy efficiency,home improvement (interest),home retrofit,how do you stop draughts,how much heat is lost through walls,how to warm up a room without a heater,raven door seal,retrofit home,save energy,thermal efficiency,weather sealing,why is my house cold,zxcvbnm58599598,